iHHD Series
Direct Drive (DD) NC Rotary Table
iHHD-650
- SPECIFICATION
- DIMENSION
- VIDEO
SPECIFICATION
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Cooling System | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System (Pneumatic) | kg/cm2 | |
| Clamping Torque | Nm | |
| Servo Motor Model | - | |
| Speed Reduction Ratio | - | |
| Rated / Max. Speed | r.p.m | |
| Rated / Max. Cutting Torque | Nm | |
| Allowable Inertia Load Capacity (Horizontal) | kg ∙ cm / sec2 | |
| Allowable Workpiece Load |
0°Horizontal |
kg |
0º~90ºTilt |
kg | |
| Allowable Load (with clamping) |
F |
N |
FxL |
Nm | |
FxL |
Nm | |
| Net Weight | kg | |
| Electrical Specification | ||
| Encoder | - | |
| Voltage (Back E.M.F) |
Vrms/100rpm | |
| Rotor Poles | - | |
| Rated / Max. Current | Arms | |
| Power Rating | KW | |
| iHHD-650 |
|---|
| Ø650 |
| Ø50 x 30 Deep |
| - |
| - |
| - |
| 18H7 |
| - |
| - |
| Water Cooling |
| D.D. Motor |
| 0.001 |
| 20 *¹ |
| 4 |
| Hydraulic 35 |
| 3700 |
| DD Motor |
| Direct Drive |
| 80/210 |
| 554/741 |
| 264 |
| 400 |
| - |
| 40000 |
| 5000 |
| 3700 |
| 479 |
| Heidenhain |
| 125.6 |
| 66 |
| 29.8/75.7(Water Colling) |
| 4.7 |
- ★*¹Indexing precision can be better after installing angle encoder. Please refer to the table on page 70 for more details.
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.
DIMENSION
iHHD-650The 4th & 5th Axis Direct Drive Motor Series
Embedded type
