CNC Tilting Rotary Tables Min. indexing angle –0.001°
FAR Series( Pneumatic Brake )
Dual-axis single-arm type
FAR(s)-160SN
-160SN-series-model.png)
- SPECIFICATION
- DIMENSION
- FEATURE
- VIDEO
SPECIFICATION
| Item/Model | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System (Hydraulic) |
kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | Straight Shaft |
| MITSUBISHI | Straight Shaft | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) | r.p.m | |
| Allowable Inertia Load Capacity (Horizontal) | kg.cm.sec2 | |
| Allowable Workpiece Load | 0º Horizontal |
kg |
0º~90º Tilt |
kg | |
| Allowable Load(with Rotary Table Clamping) | F |
kgf |
FxL |
kgf.m | |
FxL |
kgf.m | |
Strength of worm gears (Rotary axis) |
kg.m | |
| Net Weight (servo motor excluded) | kg | |
| FAR(s)-160SN(single-arm type) | |
|---|---|
| Ø 160 | |
| Ø 35H7x30 deep | |
| - | |
| Ø25 | |
| 230 | |
| 12H7 | |
| 18h7 | |
| Rotation | Tilt ±110º |
| 0.001 | 0.001 |
| 40 | 60 |
| 6 | 8 |
| Pneumatic 5 | Hydraulic 35 |
| 13 | 70 |
| αiS4 / ßiS4 | αiF8 / ßiS8 |
| HF-KP43JW04-S6 / HG-56 | HF / HG-154 |
| 1：60 | 1：120 |
| 44.4 *(33.3) | 16.6 *(11.1) |
| 0.31(Ø100SN) / 0.8(Ø160SN) | |
| 25 | |
| 20 | |
| 600 | |
| 25 | |
| 13 | |
| 9 *(3.7) | |
| 116 | |
- ★*()Alloy Steel worm & gear series.
DIMENSION
FAR(s)-160SNsingle-arm type
-160SN-3See.jpg)
FEATURE
 |
