Specification
Item
Data
Application
Vertical ou horizontal
Installation Mode
Tipo externo
Table diameter(mm)
Ø250
Inner diameter of mandrel sleeve(mm)
Ø40H7
Diameter of center through hole(mm)
Ø40
Center height (Vertical)(mm)
160
Table height (Horizontal)(mm)
160
Table T-slot width(mm)
12H7
Guide block width(mm)
18h7
Transmission Mechanisms
Coroa e sem-fim
Min. increment(deg.)
0.001
Indexing precision(sec.)
20
Repeatability(sec.)
6
Clamping system (MPa / kg/cm²)
Pneumático (0.6 / 6)
Clamping torque(N.m / kgf · m)
540 / 55
Servo motor model(FANUC)(Straight shaft without key)
αiF8 / βis8
Servo motor model(MITSUBISHI) (Straight shaft without key)
HG - 54 / 104
Speed reduction ratio
1:90
Max. rotation rate of table(min-1)
44.4
Allowable inertia load capacity (vertical)(kg-m²)
0.63
Allowable workpiece load (Vertical)(kg)
75
Allowable workpiece load (with support table)(kg)
150
Allowable workpiece load (Horizontal)(kg)
150
Allowable thrust load (with rotary table clamping) F (N / kgf)
14225 / 1450
(Axial)＊1 Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
1079 / 110
(Radial)＊2 Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
304 / 31
Driving torque(N.m / kgf·m)
284 / 29
Net weight ( sever motor excluded)(kg)
55
＊1
Caso não seja utilizado freio mecânico, este valor corresponderá ao torque de retenção do motor.
＊2
Valor limite estrutural; a velocidade real de operação poderá variar conforme o motor utilizado.
Dimension
