FAD Series( Pneumatic Brake )
The 4th & 5th Axis Direct Drive Motor Series
FAD-170F-RC210-J / FAD-210F-RC210-J
- SPECIFICATION
- DIMENSION
- VIDEO
SPECIFICATION
| Item | Unit | ||
|---|---|---|---|
| Table Diameter | mm | ||
| Diameter of Table Central Hole | mm | ||
| Inner Diameter of Mandrel Sleeve | mm | ||
| Diameter of Center Through Hole | mm | ||
| Center Height (Vertical) | mm | ||
| Table Height (Horizontal) | mm | ||
| Table T-slot Width | mm | ||
| Guide Block Width | mm | ||
| Axis | - | ||
| Cooling System | - | ||
| Transmission Mechanism | - | ||
| Min. Increment | deg. | ||
| Indexing Precision | sec. | ||
| Repeatability | sec. | ||
| Clamping System (Pneumatic) | kg/cm2 | ||
| Clamping Torque | kg-m | ||
| Servo Motor Model | FANVC | - | |
| MITSUBISHI | |||
| Speed Reduction Ratio | - | ||
| Rated / Max. Speed | r.p.m | ||
| Rated / Max. Cutting Torque | Nm | ||
| Allowable Inertia Load Capacity | kg ∙ cm / sec2 | ||
| Allowable Workpiece Load |
0°Horizontal |
kg | |
0°~90°Vertical |
kg | ||
| Allowable Load (with clamping) |
F |
N | |
FxL |
Nm | ||
FxL |
Nm | ||
| Net Weight | kg | ||
| Electrical Specification | |||
| Encoder | - | ||
| Voltage (Back E.M.F) |
Vrms/100rpm | ||
| Rotor Poles | - | ||
| Rated / Max. Current | Arms | ||
| Power Rating | KW | ||
| FAD-170F-RC210-J | FAD-210F-RC210-J |
|---|---|
| Ø170 | Ø210 |
| - | |
| Ø40H7 | |
| Ø40 | |
| 250 | |
| - | |
| 12H7 | |
| 18H7 | |
| Rotary axis | Tilt axis ±100˚ |
| Free Colling | Free Colling |
| DD Motor | Roller Gear Cam |
| 0.001 | |
| 20 | 50 |
| 4 | 8 |
| 6 | 6 |
| 310 | 310 |
| DD Motor | α8iF/β12is |
| DD Motor | HF-104 |
| Direct Drive | 1：36 |
| 200 / 300 | 83.3 |
| 29/116 | 150 |
| 1.08(Ø 170) | 1.65(Ø 210) |
| Please refer to the manual | |
| Please refer to the manual | |
| 4000 | |
| 310 | |
| 310 | |
| 173 | 176 |
| Electrical Specification | |
| Subject to demand and controller | |
| Rotary axis: 38.8 | |
| 44 | |
| 4.25 / 12.75 | |
| 0.77 | - |
DIMENSION
FAD-170F-RCThe 4th & 5th Axis Direct Drive Motor Series
