FAD Series( Pneumatic Brake )
The 4th & 5th Axis Direct Drive Motor Series
FAD-170F-RC210 / FAD-210F-RC210


- SPECIFICATION
- DIMENSION
- VIDEO
SPECIFICATION
Item | Unit | |
---|---|---|
Table Diameter | mm | |
Diameter of Table Central Hole | mm | |
Inner Diameter of Mandrel Sleeve | mm | |
Diameter of Center Through Hole | mm | |
Table Height (Horizontal) | mm | |
Table T-Slot Width | mm | |
Guide Block Width | mm | |
Axis | - | |
Cooling System | - | |
Transmission Mechanism | - | |
Min. Increment | deg. | |
Indexing Precision | sec. | |
Repeatability | sec. | |
Clamping System (Pneumatic) | kg/cm2 | |
Clamping Torque | kg-m | |
Servo Motor Model | FANUC | Taper shaft with key |
MITSUBISHI | ||
Speed Reduction Ratio | - | |
Rated / Max. Speed | r.p.m | |
Rated / Max. Cutting Torque | Nm | |
Allowable Inertia Load Capacity (Horizontal) | kg ∙ cm / sec2 | |
Allowable Workpiece Load |
0°Horizontal![]() |
kg |
0°~90°Tilt![]() |
kg | |
Allowable Load (with clamping) |
F![]() |
N |
FxL![]() |
Nm | |
FxL![]() |
Nm | |
Net Weight (D.D. motor included) | kg | |
Electrical Specification | ||
Encoder | - | |
Voltage (Back E.M.F) |
Vrms/100rpm | |
Rotor Poles | - | |
Rated / Max. Current | Arms | |
Power Rating | KW |
FAD-170F-RC210 / FAD-210F-RC210 | |
---|---|
Ø170 / Ø210 | |
- | |
Ø40H7 | |
Ø40 | |
250 | |
12H7 | |
18h7 | |
Rotary axis | Tilt axis ±100˚ |
Free Cooling | - |
DD Motor | Roller Gear Cam |
0.001 | 0.001 |
20 | 60 |
4 | 8 |
6 | Pneumatic 6/ Hydraulic 35 |
310 | 310 |
DD Motor | αiF8/βiS12 |
DD Motor | HG/HF-154 |
Direct Drive | 1:36 |
200 / 300 | 50 / 50 |
29/143 | - |
1.08 (Ø170) / 1.65 (Ø210) | |
50 | |
30 | |
4000 | |
310 | |
310 | |
173 (Ø170) / 176 (Ø210) | |
Renishaw or Heidenhain | |
Rotary axis: 38.8 | |
44 | |
4.25 / 12.75 | |
0.77 | NA |
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.